# Parts list for MidiMotor2 module (Rev. A)
#
C1-4: Capacitor100nF.10 - .1 uF Ceramic Capacitor [Jameco: 25524]
C5: Capacitor35V470nF.10 - .47uF 35V Tantalum Capacitor [Jameco: 33532]
C6: Capacitor6_3V22uF.10 - 22uF 6.3V Tantalum Capacitor [Jameco: 33752]
C7: Capacitor50V470uF.20 - 50V 470uF Electrolytic Capacitor [Jameco: 93825]
C8-9: Capacitor100nF.10 - .1 uF Ceramic Capacitor [Jameco: 25524]
D1-8: 1N5819.20 - 40PIV 3A Schottky Diode [Jameco: 177965]
N1-3: Header1x2.Polarized - 1x2 .1" MTA Polarized Header [Jameco: 613931]
N4: Header2x5.Bus - 2x5 Shrouded Male Header [Jameco: 67811]
R1-4: Resistor10K.10 - 10K Ohm 1/4 Watt Resistor [Jameco: 29911]
R5-8: Resistor220.10 - 220 Ohm 1/4 Watt Resistor [Jameco: 30470]
U1-2: L298 - Dual H-Bridge in Multiwatt-15 package [Jameco: 245403]
U3: PS2501-4 - Quad Optoisolator [Jameco: 160338]
U4: PIC16F688 - 8-bit Microchip Microcontroller [Mouser: 579-PIC16F688-I/P]
U5: MCP2551 - CAN bus tranceiver [Mouser: 579-MCP2551-I/P]
VR1: LM2940CT-5.Other - 5 Volt Low Dropout Voltage Regulator [Jameco: 107182]
X1: Resonator20MHz - 20MHz Ceramic Resonator [Mouser: 520-ZTT2000MX]
# The following parts are needed in addition to the ones above:
HS1-2: MultiWatt15_Heat_Sink [Mouser: 532-566010B3400G]
NA1-3: Header1x2_Female_Polarized - 1x3 .1" Polarized Connector [Digikey: A31031-ND]
NB1-3: Header1x2_Closed_Strain_Relief - 1x3 .1" MTA Connector Strain Relief [Jameco: 326019]
UN3: Socket_DIP16 - 16-pin IC socket [Jameco: 112222]
UN4: Socket_DIP14 - 14-pin IC socket [Jameco: 112214]
UN5: Socket_DIP8 - 8-pin IC socket [Jameco: 112206]