This is the Revision B verion of the IRProximity2 module. The status of this project is work in progress.

IRProximity2 Module (Revision B)

Table of Contents

This document is also available in PDF format.

• 1. Introduction
• 2. Programming
• 3. Hardware
  • 3.1 Circuit Schematic
  • 3.2 Printed Circuit Board
• 4. Software
• 5. Issues

1. Introduction

The IRProximity2 module provides the ability to ...

2. Programming

There is no programming specification yet.

3. Hardware

The hardware consists of a circuit schematic and a printed circuit board.

3.1 Circuit Schematic

The schematic for the IRProximity2 module is shown below:

The parts list kept in a separate file -- irproximity2.ptl.

3.2 Printed Circuit Board

The printed circuit board files are listed below:

irproximity2_back.png

The solder side layer.

irproximity2_front.png

The component side layer.

irproximity2_artwork.png

The artwork layer.

irproximity2.gbl

The RS-274X "Gerber" back (solder side) layer.

irproximity2.gtl

The RS-274X "Gerber" top (component side) layer.

irproximity2.gal

The RS-274X "Gerber" artwork layer.

irproximity2.drl

The "Excellon" NC drill file.

irproximity2.tol

The "Excellon" tool rack file.

4. Software

There is no software available yet.

5. Issues

Any fabrication issues are listed here.